Bed Size: 254 * 254mm
Hot Zone: 250 * 250 mm
WARNING! The large Heatbed draws more current than a standard size Heatbed, approximately 17-18 amps at startup for a few minutes, then it will drop to 14-15 amps.. It will most likely require a separate 12VDC power supply. If you plan on using a thermistor with your heat bed you will need to power your Heat bed via a Relay connected to your electronics since most electronics cannot output 18amps.
Wires come Pre-solderd.
Hole spacing is 249mm x 249mm (center of mounting hole to center of mounting hole)
MADE IN USA By makerfarm
Large build areas are most useful for printing many / multiple items at once.