UNImig/Jasic RazorCut CNC Interface Pinout

UNImig/Jasic RazorCut CNC Interface Pinout

Unimig/Jasic has fitted a CNC interface to their lineup of plasma units. This is great news however it’s so new that it’s not yet documented. Here is the info we have ascertained, NOTE that this info specifically relates to the 45A unit, Unimig have given...

Setting up and Testing Limit Switches

NOTE: AS OF GRBL 1.1 some of the instructions below have been updated Download Universal Gcode Sender  (Cant use Easel For this) Open the Grbl Firmware settings: Change $10 to 16   – DO NOT CHANGE $10 FOR GRBL V1.1 Set Hard limits and homing to 0  – You...

PI9000 VFD Setup

Setting up the PI9000 VFD’s Note: This information is for your Electrician – these are dangerous and you need to get someone in with the qualifications required to set up the 240V components of your CNC machine! User Manual Download   Wiring: If using...

CNC Shield

NOTE: This CNC shield product has been superseded by the GRBL Breakout and or GRBL AIO How to setup the Alternate CNCShield 4 Driver electronics board. Note, stepper driver chips are fragile and may be damaged by applying power without a motor connected — always...

Heavy Mill Build

Thank you for purchasing a 3DTek.xyz Heavy Mill. Please allow for several solid days in build and tune to get the Heavy Mill ready for use. Don’t rush – try to enjoy the build process.   Having an online guide will enable the use of videos and easily updated content....

CNC Milling Software / Workflow

So you have or are thinking of getting a shiny new Computer Numeric Control (CNC) router, but are unsure of the workflow and skills you will need? Disclaimer:  – This blog post may sound like a plug for Autodesk’s Fusion360. 3DTek.xyz apologise for our...
Your Cart